Product Description
This threaded sleeve will fit in place over the factory upper spring perch. The chassis has a stamped steel cone that locates the upper spring pad and holds the factory bump stop.
Our threaded sleeve fits over the cone. The fit may be very tight because the stamped cones are not always perfectly round. Note: You may need to sand/grind away the undercoating to fit or even cut off a small section of the cone.
The perch is designed for springs that are stock diameter in the stock location and that are flat on one end. The springs supplied are flat wound only on one end to ensure proper contact with perch, and coil wound on the other end for the stock style lower spring pad. Springs have an 8″ free length. DOES NOT INCLUDE URETHANE LOWER PADS (SOLD SEPARATELY).
Perch Specs:
-3.75″ Minimum Spring ID
-5″ Maximum Spring OD
-4″ Overall Length
-3″ Overall Adjustment Range
THIS IS NOT A COIL-OVER SET UP.
WILL ONLY FIT 2002 AND E9.
Reviews
There are no reviews yet.