Product Description
A new, positive-lock type kit. Our adjustable rear toe kit allows you to make toe adjustments for better handling and turn-in. The kit consists of two sets of brackets (left and right) and positive-lock type adjustment hardware. Each step (tooth) allows 1/16″ of adjustment, and the total range is over 1.1″. Only one wrench is required for adjustment.
Kit fits 2002, E9/E12, E21, E30, and the E28/E24 cars.
Note: I highly recommend using this kit in conjunction with the Camber Kit. When adjusting the toe on a semi-trailing arm the camber will also be affected.
Note: Initial installation requires removal of rear subframe, grinding and welding of brackets to the subframe. These plates are Zinc-plated, this plating should be ground off of the weld-zone prior to welding.
Note: We recommend the toe plates be welded on the outboard side in a horizontal position. Typically centered on the existing hole. If using in conjunction with our urethane subframe bushings or others’, you may need to cut a small section off the edge to allow for fitment/adjustment.
You can download instructions here.
Reviews
There are no reviews yet.