Rear Adjustable Height Spring Perches - 2002/E9
Processing...

Rear Adjustable Height Spring Perches - 2002/E9

Code: 02rha
Pair      Upgrade/Performance/Race

$140.00

Qty

Product Description

•••••
Upgrade/Performance/Race

This threaded sleeve will fit in place over the factory upper spring perch. The chassis has a stamped steel cone that locates the upper spring pad and holds the factory bump stop. Our threaded sleeve fits over the cone. The fit may be very tight because the stamped cones are not always perfectly round. Note: You may need to sand/grind away the undercoating to fit or even cut off a small section of the cone.

The perch is designed for springs that are stock diameter in the stock location and that are flat on one end. You can either buy new springs from us (contact us for more info) or you can spend a few minutes with a grinder and make your current springs flat on one side. We normally use 8" long springs.

OPTIONAL: Pair of racing springs that are flat wound on one end to fit these perches.

Specs:
-3.75" Minimum Spring ID
-5" Maximum Spring OD
-4" Overall Length
-3" Overall Adjustment Range


THIS IS NOT A COIL-OVER SET UP.

WILL ONLY FIT 2002 AND E9.